Staff and students, past and present, have written a substantial number of technical and research papers, many of which have been presented at national and international conferences.
Recent publications
Article
Egbe, Gregory , Arinze, Stella, Ebenuwa, Solomon, Nwajana, Emenike , Nwajana, Augustine (2024), Maintenance resources optimization using Pareto analysis: instrumentation air compressor in Oredo, Nigeria. IGI Global - Information Resources Management Association. In: , , , . IGI Global - Information Resources Management Association, International Journal of Manufacturing, Materials, and Mechanical Engineering, 13 (1) . pp. 1-14 ISSN: 2156-1680 (Print), 2156-1672 (Online) (doi: https://doi.org/10.4018/IJMMME.353392).
Kolipaka, Siva Satyanarayana , Junqueira, Laura Andrade, Ross, Steven, Garg, Vivek , Mithu, Md Sadeque Hossain , Bhatt, Saumil , Douroumis, Dionysios (2024), An advanced twin‑screw granulation technology: the use of non‑volatile solvents with high solubilizing capacity. Springer. In: , , , . Springer, AAPS PharmSci Tech, 25: 174 1530-9932 (Online) (doi: https://doi.org/10.1208/s12249-024-02890-y).
Saeed, Muhammad Asfar , Obi, Emenike R., Nwajana, Augustine (2024), A compact linear microstrip patch beamformer antenna array for millimeter-wave future communication. MDPI. In: , , , . MDPI, Sensors, 24: 4068 (13) . pp. 1-13 1424-8220 (Online) (doi: https://doi.org/10.3390/s24134068).
Baroyi, Syahrul Anis Hazwani Mohd , Abel, Stashia Eleaness Rosland, Al-Awaadh, Alhussein M, Fikry, Mohammad , Shah, Nor Nadiah Abdul Karim , Salleh, Faiqa Shazeaa Mohd , Garg, Vivek , Deng, Tong , Yusof, Yus Aniza (2024), Sweet flow: exploring the flowability, caking, morphology, and solubility of date sugars as promising sugar substitutes. Elsevier. In: , , , . Elsevier, Powder Technology ISSN: 0032-5910 (Print), 0032-5910 (Online) (doi: https://doi.org/10.1016/j.powtec.2024.119925) NB Item availability restricted.
Deng, Tong , Garg, Vivek, Bradley, Michael (2024), Erosive wear of structured Carbon-fibre-reinforced textile polymer composites under sands blasting. MDPI. In: , , , . MDPI, Lubricants, 12: 94 (3) . pp. 1-13 2075-4442 (Online) (doi: https://doi.org/10.3390/lubricants12030094).
Saeed, Muhammad and , Nwajana, Augustine (2024), A review of beamforming microstrip patch antenna array for future 5G/6G networks. Frontiers Media. In: , , , . Frontiers Media, Frontiers in Mechanical Engineering, 9: 1288171 . pp. 1-15 2297-3079 (Online) (doi: https://doi.org/10.3389/fmech.2023.1288171).
Salehi Kahrizsangi, Hamid , Timmerfors, Jessica Gard, Hajmohammadi, Hajar, Garg, Vivek , Berry, Robert , Barletta, Diego , Poletto, Massimo , Jonsson, Leif J , Bradley, Michael , Larsson, Sylvia H. (2023), The role of particle size and other properties on silo discharge behaviour of chipped wood biomass. Elsevier Science. In: , , , . Elsevier Science, Powder Technology, 432: 119174 ISSN: 0032-5910 (Print), 1873-328X (Online) (doi: https://www.sciencedirect.com/science/article/pii/S0032591023009579).
Deng, Tong , Massaro Sousa, Lucas, Garg, Vivek, Bradley, Michael S.A. (2023), Segregation of formulated powders in direct compression process and evaluations by small bench-scale testers. Elsevier. In: , , , . Elsevier, International Journal of Pharmaceutics, 647: 123544 ISSN: 0378-5173 (Print), (doi: https://doi.org/10.1016/j.ijpharm.2023.123544).
Ghanizadeh Tabriz, Atabak , Gonot-Munck, Quentin, Baudoux, Arnaud, Garg, Vivek , Farnish, Richard , L.Katsamenis, Orestis , Hui, Ho-Wah , Boersen, Nathan , Roberts, Sandra , Jones, John (2023), 3D printing of personalised Carvedilol tablets using selective laser sintering. MDPI. In: , , , . MDPI, Pharmaceutics, 15: 2230 (9) . pp. 1-19 1999-4923 (Online) (doi: https://doi.org/10.3390/pharmaceutics15092230).
Salehi Kahrizsangi, Hamid , Cummins, John, Gallino, Enrico, Garg, Vivek , Deng, Tong , Hassanpour, Ali , Bradley, Michael (2023), Optimising spread-layer quality in powder additive manufacturing: assessing packing fraction and segregation tendency. MDPI. In: , , , . MDPI, Processes, 11: 2276 (8) . pp. 1-22 2227-9717 (Online) (doi: https://doi.org/10.3390/pr11082276).
Alshahed, Osamh Sabri Mohammed Atia , Kaur, Baldeep, Bradley, Michael, Armour-Chelu, David (2023), Application of nonlinear dynamics analysis to gas-solid flow system in horizontal pneumatic conveying of plastic pellets. Elsevier Science. In: , , , . Elsevier Science, Powder Technology, 428: 118837 . pp. 1-16 ISSN: 0032-5910 (Print), 1873-328X (Online) (doi: https://doi.org/10.1016/j.powtec.2023.118837).
Deng, Tong , Garg, Vivek, Bradley, Michael (2023), Electrostatic charging of fine powders and assessment of charge polarity using an inductive charge sensor. MDPI. In: , , , . MDPI, Nanomanufacturing, 3 (3) . pp. 281-292 2673-687X (Online) (doi: https://doi.org/10.3390/nanomanufacturing3030018).
Hussain, Tariq , Deng, Tong, Bradley, Michael, Armour-Chelu, David , Pillai, John , Saadat, Salman , Kaialy, Waseem (2023), Noise reduction by using wavelet transform in charge signal acquired from an electrostatic inductive sensor. Elsevier. In: , , , . Elsevier, Measurement: Sensors, 27: 100757 . pp. 1-4 2665-9174 (Online) (doi: https://doi.org/10.1016/j.measen.2023.100757).
Singh, Gulab , Deng, Tong, Bradley, Michael, Ellis, Richard , Schenck Process UK Limited (2023), Advanced assessment of biomass materials degradation in pneumatic conveying systems: challenges and applications. MDPI. In: , , , . MDPI, Applied Sciences, 13: 1960 . pp. 1-13 2076-3417 (Online) (doi: https://doi.org/10.3390/app13031960).
Nwajana, Augustine and , Obi, Emenike Raymond (2023), Application of compact folded-arms square open-loop resonator to bandpass filter design. MDPI AG. In: , , , . MDPI AG, Micromachines, 14: 320 (2) 2072-666X (Online) (doi: https://www.mdpi.com/2072-666X/14/2/320).
Deng, Tong , Garg, Vivek, Diaz, Laura Pereira, Markl, Daniel , Brown, Cameron , Florence, Alastair , Bradley, Michael S.A. (2022), Comparative studies of powder flow predictions using milligrams of powder for identifying powder flow issues. Elsevier. In: , , , . Elsevier, International Journal of Pharmaceutics, 628: 122309 ISSN: 0378-5173 (Print), (doi: https://doi.org/10.1016/j.ijpharm.2022.122309).
Obi, Emenike R. and , Nwajana, Augustine (2022), Modeling, integration, and automation of degradation to generate asset lifespan analytics using AssessLIFE software. IGI Global - Information Resources Management Association. In: , , , . IGI Global - Information Resources Management Association, International Journal of Manufacturing, Materials, and Mechanical Engineering, 12: 28 (1) . pp. 1-40 ISSN: 2156-1680 (Print), 2156-1672 (Online) (doi: https://doi.org/10.4018/IJMMME.300828).
Massaro Sousa, Lucas , Amblard, Benjamin, Tebianian, Sina, Institut Français du Pétrole (IFPEN) (2022), CFD simulation for characterization and scale-up of pulsed biomass transport. Elsevier - Pergamon. In: , , , . Elsevier - Pergamon, Chemical Engineering Science, 255: 117652 . pp. 1-12 ISSN: 0009-2509 (Print), (doi: https://doi.org/10.1016/j.ces.2022.117652).
Jiang, Yang , Deng, Tong, Nasr, Karim (2022), Baseline tracking in bipolar charge signal process by dynamic time warping algorithm. Institute of Electrical and Electronics Engineers (IEEE). In: , , , . Institute of Electrical and Electronics Engineers (IEEE), IEEE Sensors Journal, 23 (5) . pp. 4540 -4547 ISSN: 1530-437X (Print), 1558-1748 (Online) (doi: https://doi.org/10.1109/JSEN.2022.3162494).
Garg, Vivek , Deng, Tong, Bradley, Michael (2021), A new method for assessing powder flowability based on physical properties and cohesiveness of particles using a small quantity of samples. Elsevier Science. In: , , , . Elsevier Science, Powder Technology ISSN: 0032-5910 (Print), 1873-328X (Online) (doi: https://doi.org/10.1016/j.powtec.2021.10.027).
Pretti Ogura, Allan , Zanin Lima, Jaqueline, Pelinsom Marques, Jéssica, Massaro Sousa, Lucas , Guimarães Silvestre Rodrigues, Valéria , Luiz Gaeta Espíndola, Evaldo (2021), A review of pesticides sorption in biochar from maize, rice, and wheat residues: current status and challenges for soil application. Elsevier - Academic Press. In: , , , . Elsevier - Academic Press, Journal of Environmental Management, 300: 113753 ISSN: 0301-4797 (Print), (doi: https://doi.org/10.1016/j.jenvman.2021.113753).
Gilvari, Hamid , van Battum, H, Farnish, Richard, Pang, Yusong , de Jong, Wiebren , Schott, Digena (2021), Fragmentation of fuel pellets during transport via a belt conveyor: a design of experiment study. Elsevier - Institute of Process Engineering - Chinese Society of Particuology - Science Press. In: , , , . Elsevier - Institute of Process Engineering - Chinese Society of Particuology - Science Press, Particuology, 66 . pp. 29-37 ISSN: 1674-2001 (Print), (doi: https://doi.org/10.1016/j.partic.2021.08.007).
Massaro Sousa, Lucas , Amblard, Benjamin, Montjovet, Florian, Tebianian, Sina (2021), Characterization of a pressurized feeder for biomass injection into gas-solid systems. Elsevier. In: , , , . Elsevier, Chemical Engineering Research and Design, 175 . pp. 171-181 ISSN: 0263-8762 (Print), (doi: https://doi.org/10.1016/j.cherd.2021.08.024).
Deng, Tong , Garg, Vivek, Bradley, Michael S.A. (2021), A study of particle adhesion for cohesive powders using a novel mechanical surface energy tester. Elsevier. In: , , , . Elsevier, Powder Technology, 391 . pp. 46-56 ISSN: 0032-5910 (Print), 1873-328X (Online) (doi: https://doi.org/10.1016/j.powtec.2021.06.002).
Deng, Tong , Garg, Vivek, Salehi, Hamid, Bradley, Michael S. A. (2021), Correlations between segregation intensity and material properties such as particle sizes and adhesions and novel methods for assessment. Elsevier. In: , , , . Elsevier, Powder Technology, 387 . pp. 215-226 ISSN: 0032-5910 (Print), 1873-328X (Online) (doi: https://doi.org/10.1016/j.powtec.2021.04.023).
Massaro Sousa, Lucas , Schulz, CG, Condotta, Rodrigo, do Carmo Ferreira, Maria (2021), On the design of conical hoppers for spent coffee grounds: moisture content and particle-size effects. Elsevier Ltd.. In: , , , . Elsevier Ltd., Journal of Food Engineering, 300: 110537 ISSN: 0260-8774 (Print), 0260-8774 (Online) (doi: https://doi.org/10.1016/j.jfoodeng.2021.110537) NB Item availability restricted.
Salehi Kahrizsangi, Hamid , Karde, Vikram, Hajmohammadi, Hajar, Dissanayake, Susantha , Larsson, Sylvia , Heng, Jerry , Bradley, Michael (2021), Understanding flow properties of mannitol powder at a range of temperature and humidity. Elsevier B.V.. In: , , , . Elsevier B.V., International Journal of Pharmaceutics, 596: 120244 ISSN: 0378-5173 (Print), (doi: https://doi.org/10.1016/j.ijpharm.2021.120244).
Deng, Tong , Garg, Vivek, Salehi, Hamid, Bradley, Michael S. A. (2020), An experimental study on free-surface rolling segregation and correlations with angle of repose and particle sphericity. Elsevier B.V.. In: , , , . Elsevier B.V., Powder Technology, 379 . pp. 307-320 ISSN: 0032-5910 (Print), 1873-328X (Online) (doi: https://doi.org/10.1016/j.powtec.2020.10.077).
Stutt, Richard O. J. H. , Retkute, Renata, Bradley, Michael, Gilligan, Christopher A. , Colvin, John (2020), A modelling framework to assess the likely effectiveness of facemasks in combination with ‘lock-down’ in managing the COVID-19 pandemic. The Royal Society. In: , , , . The Royal Society, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 476: 20200376 (2238) ISSN: 1364-5021 (Print), 1471-2946 (Online) (doi: https://doi.org/10.1098/rspa.2020.0376).
Massaro Sousa, Lucas and , do Carmo Ferreira, Maria (2020), On the performance of a spouted bed type device for feeding spent coffee grounds to a circulating fluidized bed reactor. Elsevier B.V.. In: , , , . Elsevier B.V., Chemical Engineering Research and Design, 160 . pp. 31-38 ISSN: 0263-8762 (Print), (doi: https://doi.org/10.1016/j.cherd.2020.05.002).
Massaro Sousa, Lucas , do Carmo Ferreira, Maria, Hou, Qinfu, Yu, Aibing (2020), Feeding spent coffee grounds into reactors: TFM simulation of a non-mechanical spouted bed type feeder. Elsevier. In: , , , . Elsevier, Waste Management, 109 . pp. 161-170 ISSN: 0956-053X (Print), (doi: https://doi.org/10.1016/j.wasman.2020.04.056) NB Item availability restricted.
Zhang, Guangdong , Huang, Xiang, Li, Shuanggao, Xia, Chao , Deng, Tong (2020), Improved inverse design method for thin-wall hollow profiled polymer extrusion die based on FEM-CFD simulations. Springer. In: , , , . Springer, The International Journal of Advanced Manufacturing Technology, 106 (7-8) . pp. 2909-2919 ISSN: 0268-3768 (Print), 1433-3015 (Online) (doi: https://dx.doi.org/10.1007/s00170-019-04785-w).
Sharma, Atul and , Mallick, SS (2019), An investigation into pressure drop through bends in pneumatic conveying systems. Taylor and Francis. In: , , , . Taylor and Francis, Particulate Science and Technology, 39 (2) . pp. 180-191 ISSN: 0272-6351 (Print), 1548-0046 (Online) (doi: https://doi.org/10.1080/02726351.2019.1676348).
Massaro Sousa, Lucas and , do Carmo Ferreira, Maria (2019), Densification behavior of dry spent coffee ground powders: experimental analysis and predictive methods. Elsevier Science. In: , , , . Elsevier Science, Powder Technology, 357 . pp. 149-157 ISSN: 0032-5910 (Print), 1873-328X (Online) (doi: https://doi.org/10.1016/j.powtec.2019.08.069) NB Item availability restricted.
Salehi, Hamid , Berry, Robert, Farnish, Richard, Bradley, Mike (2019), Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder. Wiley. In: , , , . Wiley, Chemical Engineering & Technology, 43 (1) . pp. 150-156 ISSN: 0930-7516 (Print), 1521-4125 (Online) (doi: https://doi.org/10.1002/ceat.201900092) NB Item availability restricted.
Zhang, Guangdong , Huang, Xiang, Li, Shuanggao, Deng, Tong (2019), Optimized design method for profile extrusion die based on NURBS modeling. Springer. In: , , , . Springer, Fibers and Polymers, 20 (8) . pp. 1733-1741 ISSN: 1229-9197 (Print), 1875-0052 (Online) (doi: https://doi.org/10.1007/s12221-019-1168-y).
García-Triñanes, Pablo , Luding, Stefan, Shi, Hao (2019), Tensile strength of cohesive powders. Elsevier. In: , , , . Elsevier, Advanced Powder Technology, 30 (12) . pp. 2868-2880 ISSN: 0921-8831 (Print), 1568-5527 (Online) (doi: https://doi.org/10.1016/j.apt.2019.08.017).
Khizer, Zara , Akram, Muhammad R., Sarfraz, Rai M., Nirwan, Jorabar Singh , Farhaj, Samia , Yousaf, Maria , Hussain, Tariq , Lou, Shan , Timmins, Peter , Conway, Barbara R. (2019), Plasticiser-free 3D printed hydrophilic matrices: Quantitative 3D surface texture, mechanical, swelling, erosion, drug release and pharmacokinetic studies. MDPI. In: , , , . MDPI, Polymers, 11: 1095 (7) 2073-4360 (Online) (doi: https://doi.org/10.3390/polym11071095).
Salehi, Hamid , Berry, Robert, Farnish, Richard, Bradley, Mike (2019), A new uniaxial compression tester: development and application. The Italian Association of Chemical Engineering (AIDIC). In: , , , . The Italian Association of Chemical Engineering (AIDIC), Chemical Engineering Transactions, 74 . pp. 463-468 ISSN: 2283-9216 (Print), (doi: https://doi.org/10.3303/CET1974078) NB Item availability restricted.
Salehi, Hamid , Berry, Robert, Deng, Tong, Larsson, Sylvia H. , Farnish, Richard , Bradley, Mike (2019), Development and application of a novel cake strength tester. Elsevier. In: , , , . Elsevier, Powder Technology, 350 . pp. 36-42 ISSN: 0032-5910 (Print), 1873-328X (Online) (doi: https://doi.org/10.1016/j.powtec.2019.03.024).
Book section
Tripathi, Anuj , Garg, Vivek, Vargis, Binu Kuriakose, Agrawal, Chaitanya P. (2023), Blockchain-enabled secured medical supply chain management. CRC Press, Taylor & Francis. In: , , In: Teena Bagga, Kamal Upreti, Nishant Kumar, Amirul Hasan Ansari, Danish Nadeem (eds.), Designing Intelligent Healthcare Systems, Products, and Services Using Disruptive Technologies and Health Informatic. CRC Press, Taylor & Francis, Boca Raton (1st) . pp. 189-210 . ISBN: 9781003217107 (doi: https://doi.org/10.1201/9781003217107).
Sengupta, Shampa , Pal, Kumud Ranjan, Garg, Vivek (2022), Design of an intelligent system for diabetes prediction by integrating rough set theory and genetic algorithm. CRC Press, Taylor Francis. In: , , In: Teena Bagga, Kamal Upreti, Nishant Kumar, Amirul Hasan Ansari, Danish Nadeem (eds.), Designing Intelligent Healthcare Systems, Products, and Services Using Disruptive Technologies and Health Informatic. CRC Press, Taylor Francis, Boca Raton (1st) . pp. 157-172 . ISBN: 9781003217107 (doi: https://doi.org/10.1201/9781003217107).
Kure, Halima and , Nwajana, Augustine (2022), Protection of critical infrastructure using an Integrated Cybersecurity Risk Management (i-CSRM) framework. IGI Global. In: , , In: Augustine Nwajana (ed.), 5G Internet of Things and Changing Standards for Computing and Electronic System. IGI Global, Hershey, Pennsylvania (1st) . pp. 94-133 . ISBN: 9781668438558; 1668438550; 9781668438565; 97816684385 (doi: https://doi.org/10.4018/978-1-6684-3855-8.ch004).
Obi, Emenike and , Nwajana, Augustine (2022), AssessLIFE software for automation of asset degradation to estimate Asset life and degradation drivers. IGI Global. In: , , In: Augustine Nwajana (ed.), 5G Internet of Things and Changing Standards for Computing and Electronic System. IGI Global, Hershey, Pennsylvania (1st) . pp. 30-80 . ISBN: 9781668438558; 1668438550; 9781668438565; 97816684385 (doi: https://doi.org/10.4018/978-1-6684-3855-8.ch002).
Conference item
Alshahed, Osamh Sabri Mohammed Atia , Kaur, Baldeep, Bradley, Michael, Armour-Chelu, David (2024), Model predictive control simulation of pneumatic conveying of plastic pellets using nonlinear dynamics analysis and sparse identification of nonlinear dynamics with control. International Conference on Conveying and Handling of Particulate Solids (CHoPS). In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd-4th of September, 2024, Edinburgh In: CHoPS 2024 Conference Committee (ed.), Conveying and Handling of Particulate Solids (CHoPS) 2024 conference digital proceeding. International Conference on Conveying and Handling of Particulate Solids (CHoPS), Edinburgh, UK (1st) (doi: https://www.chops2024.ed.ac.uk/about.html).
Deng, Tong , Garg, Vivek, Bradley, Michael (2024), Effects of electrostatic charge on particle adhesion, cohesiveness and its influences on powder flow properties. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh , . , (doi: https://www.chops2024.ed.ac.uk/).
Sarnavi, Hamed J. and , Bradley, Michael (2024), On the effect of powder cohesion on the location of Geldart Group A to Group C fluidisation boundaries. In: CHoPS 2024: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd-4th of September, 2024, Edinburgh , . , (1st) (doi: https://www.chops2024.ed.ac.uk/).
Bradley, Michael and , Garg, Vivek (2024), On the convergent flow property behaviour of different fine dry powders across wide size ranges, and the concept of critical particle size. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh , . , (doi: https://www.chops2024.ed.ac.uk/).
Garg, Vivek , Deng, Tong, Bradley, Michael (2024), Effects of relative humidity and temperature on particle adhesion measurements using mechanical surface energy tester. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh , . , (doi: https://www.chops2024.ed.ac.uk/).
Garg, Vivek , Deng, Tong, Sousa, Lucas Massaro, Bradley, Michael (2024), Evaluation of segregation of pharmaceutical formulations in direct compression process. In: 11th International Conference on Conveying and Handling of Particulate Solids, 2nd -4th Sep., 2024, Edinburgh , . , (doi: https://www.chops2024.ed.ac.uk/).
Alshahed, Osamh Sabri Mohammed Atia , Kaur, Baldeep, Bradley, Michael (2023), Cross recurrence quantification analysis of gas-solid flow in pneumatic conveying of plastic pellets using electrostatic sensors. In: 9th UK-China International Particle Technology Forum / 18th Particle Technology Early Career Forum, 21st - 24th Aug 2023, Greenwich, London, UK , . , (doi: https://constableandsmith.com/events/uk-china-PTF9-2023).
Bradley, Michael and , (2023), Structural failure of silos: learning lessons from failure. University of Wollongong. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia In: David Hastie (ed.), 14th International Conference on Bulk Materials Storage, Handling and Transportation. 11th - 13th July, 202. University of Wollongong, Wollongong, New South Wales, Australia (1st) (doi: http://www.icbmh2023.com.au/).
Alshahed, Osamh Sabri Mohammed Atia , Kaur, Baldeep, Bradley, Michael, Okereke, Michael (2023), Experimental and numerical study on gas-solid flow system of plastic pellets using recurrence quantification analysis of pressure sensor measurements. In: UKACM 2023 Conference (UK Association for Computational Mechanics), 19th - 21st April 2023, The University of Warwick, 19-21 April 2023 , . , (doi: https://sites.google.com/view/ukacm2023conference).
Ribeiro, Kandice Suane Barros , Farnish, Richard J., Coelho, Reginaldo Teixeira (2019), Evaluation of the Restricted Air Entry on the Discharge Rate from Silos. In: 25th ABCM International Congress of Mechanical Engineering, 20-25 October 2019, Uberlandia, MG, Brazil , . , (doi: ).
Bradley, Mike and , Wardle, J. P. (2019), Powder Flow in the AM Process: Understanding its impact and potential problems. In: IDTechEX, 10-11 April 2019, Estrel Convention Center, Berlin, Germany , . , (doi: https://www.idtechex.com/europe2019/show/en/).
Conference proceedings
Saeed, Muhammad A. and , Nwajana, Augustine (2024), Sub-terahertz microstrip antenna array for future communication. Institute of Electrical and Electronics Engineers (IEEE). In: 2023 International Conference on Electrical, Computer and Energy Technologies (ICECET), 16-17 November 2023, Cape Town, South Africa In: ICECET Conference Committee (ed.), 2023 International Conference on Electrical, Computer and Energy Technologies (ICECET). Cape Town, South Africa, 16th - 17th November 202. Institute of Electrical and Electronics Engineers (IEEE), Piscataway, New Jersey (1st) . pp. 1-4 . ISBN: 9798350327816; :9798350327823 (doi: https://doi.org/10.1109/ICECET58911.2023.10389582).
Alshahed, Osamh Sabri Mohammed Atia , Kaur, Baldeep, Bradley, Michael (2023), Application of chaos analysis to electrostatic measurements of horizontal gas-solid flow in pneumatic conveying of plastic pellets. Engineers Australia. In: ICBMH2023 - The 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia In: David Hastie (ed.), ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 202. Engineers Australia, Wollongong, New South Wales, Australia (1st) . pp. 455-463 . ISBN: 9781925627831 (doi: https://icbmh2023.com.au/documents/ICBMH2023%20Conference%20Proceedings.pdf).
Alshahed, Osamh Sabri Mohammed Atia , Kaur, Baldeep, Bradley, Michael (2023), Application of recurrence quantification analysis to electrostatic measurements of horizontal gas-solid flow in pneumatic conveying of plastic pellets. Engineers Australia. In: ICBMH2023 - The 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia In: David Hastie (ed.), ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 202. Engineers Australia, Wollongong, New South Wales, Australia (1st) . pp. 413-424 . ISBN: 9781925627831 (doi: https://icbmh2023.com.au/documents/ICBMH2023%20Conference%20Proceedings.pdf).
Alupathgala Kankanamalage, Chanaka Prasad , Kaur, Baldeep, Salehi Kahrizsangi, Hamid, Ellis, Richard , Bradley, Michael (2023), System identification and stability analysis of a pneumatic conveying pipeline based on blower input voltage and particle velocity: preliminary study. Engineers Australia. In: ICBMH2023 - The 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th Jul, 2023, Wollongong, New South Wales, Australia In: David Hastie (ed.), ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 202. Engineers Australia, Wollongong, New South Wales, Australia (1st) . pp. 436-444 . ISBN: 9781925627831 (doi: https://icbmh2023.com.au/documents/ICBMH2023%20Conference%20Proceedings.pdf).
Farnish, Richard , Bradley, Michael, Garg, Vivek (2023), Investigations into optimal pulse cleaning of dust filter media. Engineers Australia. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia In: David Hastie (ed.), ICBMH 2023: 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings: Wollongong, NSW Australia, 11th - 13th July, 202. Engineers Australia, Wollongong, New South Wales, Australia (1st) . pp. 154-160 . ISBN: 978‐1925627831 (doi: https://icbmh2023.com.au/documents/ICBMH2023%20Conference%20Proceedings.pdf) NB Item availability restricted.
Singh, Gulab , Deng, Tong, Bradley, Michael, Ellis, Richard , Schenck Process (2023), Evaluation and calibration of wood pellets degradation using a rotary impact tester against single-bend attrition tester. Engineers Australia. In: 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th July 2023, Wollongong, New South Wales, Australia In: David Hastie (ed.), ICBMH2023 14th International Conference on Bulk Materials Storage, Handling and Transportation. Proceedings. Wollongong, NSW, Australia, 11th - 13th July, 202. Engineers Australia, University of Wollongong, New South Wales, Australia (1st) . pp. 309-320 . ISBN: 978‐1925627831 (doi: https://www.icbmh2023.com.au/documents/ICBMH2023%20Draft%20Conference%20Program%20V3.pdf) NB Item availability restricted.
Dissanayake Mudiyanselage, Susantha , Bradley, Michael, Zigan, Stefan, Salehi Kahrizsangi, Hamid , Deng, Tong (2023), Frequency domain analysis to identify main segregation contributors in a chain of material handling. ICBMH - The Institution of Engineers. In: The 14th International Conference on Bulk Materials Storage, Handling and Transportation, 11th - 13th Jul, 2023, Wollongong, New South Wales, Australia In: Chanaka Prasad Alupathgala Kankanamalage, Baldeep Kaur, Hamid Salehi Kahrizsangi, Michael Bradley, Richard Ellis (eds.), ICBMH2023: 14th International Conference on Bulk Materials Storage, Handling and Transportatio. ICBMH - The Institution of Engineers, Wollongong, NSW Australia (1st) . pp. 372-380 . ISBN: 9781925627831 (doi: https://search.informit.org/doi/abs/10.3316/informit.446620967305237) NB Item availability restricted.
Farnish, Richard , Beladi, Abdelhafid, Zigan, Stefan (2019), Investigation into the effects of cyclic particle loading onto filter media. University of Newcastle, Australia. In: , , , ICBMH 201. University of Newcastle, Australia, (doi: ).
Farnish, Richard , Belaidi, Hafid, Zigan, Stefan (2019), The effects of reverse jet pulse over-pressurisation on dust filter performance. University of Newcastle, Australia. In: , , , ICBMH 201. University of Newcastle, Australia, (doi: ).
Other
Nwajana, Augustine and , Okafor, Patrick (2023), Call for Papers for Frontiers in Mechanical Engineering Special Issue: RFID and RF Circuits/Components. Frontiers Media. In: , , , . Frontiers Media, Frontiers in Mechanical Engineering (1st) 2297-3079 (Online) (doi: https://www.frontiersin.org/research-topics/54737/rfid-and-rf-circuitscomponents).
Patent
Vargis, Binu Kuriakose , Upreti, Kamal, Chauhan, Riya, Srivastava, Shreya , Gupta, Utkarsh , Garg, Vivek , Bradley, Michael (2022), Modified design for toilet seat for urination and defecation. In: , , , . , (doi: https://search.ipindia.gov.in/designsearch) NB Item availability restricted.
Bhatia, Pramod , Bhatia, Suman, Chaba, Yogesh, Dembla, Deepak , Garg, Vivek , Goyal, Vishal , Jain, Bharat Bhushan , Jha, Pradeep , Shekhar, Shekhar , Tinker, Seema (2022), Intelligent seating system based on IoT and machine learning. In: , , , . , (doi: https://register.dpma.de/DPMAregister/pat/register?AKZ=2020221025908&CURSOR=0).
Garg, Vivek , Massaro Sousa, Lucas, Bradley, Michael, Vargis, Binu (2022), Medical suction pump controller - Certificate of Registration of Design No 360064-001. In: , , , . , (doi: ).
Vargis, Binu Kuriakose , Upreti, Kamal, Manarcad, Philson, Garg, Vivek , Harshavardhan, A , Paul, Basil , Agrawal, Chaitanya P. , Arora, Sangeeta (2021), A honeypot based network security system. In: , , , . , (doi: http://pericles.ipaustralia.gov.au/ols/auspat/applicationDetails.do?applicationNo=2021103735).
Garg, Vivek , Vargis, Binu, Bradley, Michael (2021), Computer implemented method for scanning for determining characteristics of materials using Artificial Intelligence. In: , , , . , (doi: http://pericles.ipaustralia.gov.au/ols/auspat/applicationDetails.do?applicationNo=2021103287).